FTTH/FTTX Cable Joint Enclosure Fiber Optic Dome Splice Closure

• Customization: Available
• Type: Dome Fiber Optic Splice Closure
• Wiring Devices: ODF
• Model NO.: FOSC-GJS-D315
• Certification: ISO, RoHS
• Condition: New
• Dimension (mm): 470mm*210mm
• Weight (Excluding Outside Box): 2350g-3500g
• Number of Inlet/Outlet Ports: 5 Ports (1 Oval & 4 Round)
• Diameter of Fiber Cable: 8-25(mm)
• Max Capacity of Fiber Splice: 24 Single Cores
• Max Capacity of Splice Tray: 6 Trays
• Sealing Structure: Heat-Shrinkable Sealing
• Max Capacity of Fosc: Bunchy: 24-144 (Cores) Ribbon: Max. 432 (Cores
• Transport Package: Carton Box
• Specification: Suitable for aerial, duct, or buried applications.
• Trademark: Fiberlink
• Origin: China
• HS Code: 8536700000
• Production Capacity: 1000000 Per Month

Product Description

FTTH/FTTX Cable Joint Enclosure Fiber Optic Dome Splice Closure

Fiberlink's Fiber Optic Splice Closure are made of high density reinforced PC material. We supply different ports types, fittings and different fiber optic core numbers for horizontal / dome fiber optic splice closures. Fiberlink's Fiber Optic Splice Closures are suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects.






Features
Suitable for ordinary fiber and ribbon fiber.
Fully kitted with all parts for convenient operation.
Overlap structure in splicing tray for easy installation.
Fiber-bending radium guaranteed more than 40mm.
Easy to install and re-entry with a common can wrench.
Excellent Mechanical Sealed to protect fiber and splice ensuring durability.
Stand up to severe condition of moisture,vibration and extreme temperatures.

Applications
FTTX (FTTP, FTTH, FTTN, FTTC)
Local Area Networks (LAN)
Telecommunication Networks
CATV Networks

P/N and Specifications

Item No.	FOSC-GJS-D315	FOSC-GJS-D315
Outside dimension (HxW)	470mm×210mm
Weight (excluding outside box)	2350g-3500g
Number of inlet/outlet ports	5 ports (1 oval & 4 round)
Diameter of fiber cable	Φ8-Φ25(mm)
Max Capacity of Fiber splice	24 Single cores
Max Capacity of Splice Tray	6 Trays
Max Capacity of FOSC	Bunchy: 24-144 (Cores) Ribbon: max. 432 (Cores)
Sealing Structure	Heat-shrinkable sealing

Installation Manual

1. Scope of application

This Installation Manual is for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation. The scope of application is: aerial, underground, wall-mounting, duct-mounting and handhole-mounting. The ambient temperature ranges from -40ºC to +65ºC.

2. Basic structure and configuration 
2.1 Dimension and capacity

Part Number	FOSC-GJS-D315
Outside dimension (Height x Diameter)	470mm×210mm
Weight (excluding outside box)	2350 g- 3500g
Number of inlet/out ports	5 pieces in general (1 Oval & 4 round ports)
Diameter of fiber cable	Φ8mm~Φ25 mm
Capacity of FOSC	Bunchy: 24-144 (cores), Ribbon: up to432(cores)

2.2 Main components

No.	Name of components	Quantity	Usage	Remarks
1	FOSC cover	1 piece	Protecting fiber cable splices in whole	Height x Diameter 360mm x 177mm
2	Fiber optic splice tray (FOST)	Max. 6 trays (bunchy) Max. 6 trays (ribbon)	Fixing heat shrinkable protective sleeve and holding fibers	Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces)
3	Fiber holding tray	1 piece	Holding fibers with protective coat
4	Base	1set	Fixing internal and external structure
5	Plastic hoop	1 set	Fixing between FOSC cover and base
6	Seal fitting	1 piece	Sealing between FOSC cover and base
7	Pressure testing valve	1 set	After inject air, it is used for  pressure testing and sealing testing	Configuration as per requirement
8	Earthing deriving device	1 set	Deriving metal parts of fiber cables in FOSC for earthing connection	Configuration as per requirement

2.3 Main accessories and special tools

No.	Name of accessories	Quantity	Usage	Remarks
1	Heat shrinkable protective sleeve		Protecting fiber splices	Configuration as per capacity
2	Nylon tie		Fixing fiber with protective coat	Configuration as per capacity
3	Heat shrinkable fixing sleeve (single)		Fixing and sealing single fiber cable	Configuration as per requirement
4	Heat shrinkable fixing sleeve (mass)		Fixing and sealing mass of fiber cable	Configuration as per requirement
5	Branching clip		Branching fiber cables	Configuration as per requirement
6	Earthing wire	1 piece	Putting through between earthing devices
7	Desiccant	1 bag	Put into FOSC before sealing for desiccating air
8	Labeling paper	1 piece	Labeling fibers
9	Special wrench	1 piece	Tightening nut of reinforced core
10	Buffer tube	decided by customers	Hitched to fibers and fixed with FOST, managing buffer.	Configuration as per requirement
11	Aluminum-foil paper	1 piece	Protect the bottom of FOSC

3. Necessary tools for installation
3.1 Supplementary materials (to be provided by operator)

Name of materials	Usage
Scotch tape	Labeling, temporarily fixing
Ethyl alcohol	Cleaning
Gauze	Cleaning

3.2 Special tools (to be provided by operator)

Name of tools	Usage
Fiber cutter	Cutting off fiber cable
Fiber stripper	Strip off protective coat of fiber cable
Combo tools	Assembling FOSC

3.3 Universal tools (to be provided by operator)

Name of tools	Usage and specification
Band tape	Measuring fiber cable
Pipe cutter	Cutting fiber cable
Electrical cutter	Take off protective coat of fiber cable
Combination pliers	Cutting off reinforced core
Screwdriver	Crossing/Paralleling screwdriver
Scissor
Waterproof cover	Waterproof, dustproof
Metal wrench	Tightening nut of reinforced core

3.4 Splicing and testing instruments (to be provided by operator)

Name of instruments	Usage and specification
Fusion Splicing Machine	Fiber splicing
OT DR	Splicing testing
Provisional splicing tools	Provisional testing
Fire sprayer	Sealing heat shrinkable fixing sleeve

Notice: The above-mentioned tools and testing instruments should be provided by the operators themselves.





5.  The process of installing FOSC.

1. 1.  Step One - Open the closure
      1. Cleaning the locale and determine where to install the FOSC and then place

fiber cables required.

1. 1. 1. Check whether the main components and accessories have been well prepared

inside the package.

1. 1. Open the closure

 Demount hoop fixing bolt and pull hoop locking system out, then proceed in     demounting the hoop. Pull the FOSC cover upwards out, installation could begin.   

1. 1.  See Drawing 1 

Important issues: If the weather condition is not good enough, then a tent must
be pitched for waterproof and dustproof.
 

1. 1. Step Two -Determine length of fiber cable to be fixed and stripped inside     FOSC
      1. If all fibers are for branch splicing, please refer to Drawing 2(A) for stripping length.If some fibers are for straight-through, while others are for branch splicing, please refer to Drawing 2(B) for stripping length.See Drawing 2.

Important issues:  1. Reserve enough length of fiber cable to be spliced.     2. Stripping length also could be decided by customers according to
installation requirement

5.3  Step Three -Strip off protective coat of fiber cable and fiber
5.3.1  Strip off protective coat of fiber cable from the temp. locating mark with the cutter and
the stripper, please refer to Drawing 2 for stripping length. Stripping length also could
be decided according to installation requirement 
5.3.2  See Drawing 3.
Important issues:  If it is difficult to pull all the protective coat of fiber cable at one time, strip
 it off section by section to avoid fiber breakage.
 

1. 1.   Step Four - Separate fiber cores and prepare work prior to fixing fiber cable.
      1.  Wind 2 layers of insulation tape on protective coat of fiber core for protection.

 Meanwhile, get rid of the stuffing to separate fiber core and clean them. Form a ring
  with the diameter of 100mm or so and fix it on the fiber temporarily by adhesive tape.

1. 1. 1.  Depending on fiber cable stripped, the following two cases are available.

  All fibers are to be branched after being spliced completely.
  Some of fibers are for straight-through after being winded, while the others are for
 branch splicing.

1. 1. 1. The FOSC is provided with 3 single entry/exit tubes which suit for single fiber

cables with max. diameter ф16mm and 1 mass entry/exit tube which suits for 1
piece of fiber cable with max. diameter ф 25mm or 2 pieces of fiber cables with max.
diameter ф 21mm or multi-pieces of fiber cables with short diameter.
5.4.4 Mass entry/exit tube is required if some fibers are for straight-through
5.4.5 The corresponding entry/exit tube cover could be slightly knocked out with
 screwdriver from inside to outside according to number and diameter of fiber cable
required.

1. 1. 1. Reserve reinforced core in 70mm length and cut off the unnecessary ones.See Drawing 4 and Drawing 5.

Important Issues:Entry/exit tubes are to be selected accurately to make it easy for splicing and sealing.  

5.5  Fix reinforced core, and pyrocondense, fix and seal fiber cable.
5.5.1   Insert fiber cable into the corresponding heat shrinkable fixing tube, further insert the
them into entry/exit tube at the bottom of FOSC.
  5.5.2 Demount fixing nut of reinforced core with a special wrench (plastic one), which is to be inserted into the fixing slot afterward and tighten it. Then re-tighten it with a metal wrench (the metal wrench is to be provided by operator).
5.5.3   Hitch heat shrinkable fixing sleeve to the fiber cable till its root by hand.
5.5.4 Please refer to Drawing 5 for installing branching clip.
5.5.5 Heat heat shrinkable fixing sleeve with fire sprayer to make it hugging entry/exit tube
and fiber cable to reach complete sealing.
5.5.6   See Drawing 5
important issue: 1. Fixing nut of reinforced core should be tightened.
              2. While heating, heat shrinkable fixing tube should shrink evenly, and there
 should be no bubbles, pores and other defects inside the tube.

5.6  Step Six - Splice fibers
5.6.1 Follow user manual of fusion splicing machine to splice fiber.
Important issue: pay attention to the twist and bend of fiber
 

1. 1.  Step Seven -Install heat shrinkable protective sleeve and house fibers.

5.7.1  When having completed splicing the fibers, the first fiber ring should be housed
on the farthest side of FOST, the remaining fiber optic should be winded, forming a ring
with diameter not less than 80mm. then put it into FOST (Fiber Optic Splice Tray)
 together with heat shrinkable protective sleeve.
( Firstly fix heat shrinkable protective sleeve into the slot, then enlarge the diameter of
fiber ring properly.)
     5.7.2  see Drawing 6
Important issue: pay attention to the twist and bend of fiber.
 

1. 1. Step Eight - Check up comprehensively

To ensure the technical requirements, the following instructions must be followed:

1. 1. 1. Fibers with protective coat are fixed with nylon tie at the entrance of FOST.Grommet should be pressed from inside to outside in order to properly install FOST.Straight-through and reserved fibers with protective coat should be winded to the fiber holding tray. Check whether the internal tighteners and fixing nut of reinforced core are well tightened.Check whether seal fitting is installed neatly and smoothly.Check whether heat shrinkable fixing sleeve is reliable and sealing completely.See Drawing 7.

Important issues: If any problems occur, they should be solved right away.

5.9  Step Nine - Assemble FOSC housing and fix FOSC
5.9.1  Put desiccant into FOSC.
 5.9.2  Put FOSC cover on base directly.
5.9.3  Install plastic hoop between FOSC cover and base, tighten hoop locking system,
 which is to be fixed by hoop fixing bolt then.

1. 1. 1. FOSC installation

 Aerial application: fix metal hoop and transom to the pole. Please refer to Drawing 8
 Wall mounting application: fix the bracket on the wall with bolt. (metal hoop is not
required.)
 Underground application: metal hoop is not required.
5.9.5  See drawing 8
Important issues: 1. Pay attention while installing plastic hoop.
        2. The specification of bolt for fixing the bracket is M8.
 

1. Fiber Optic Splice Closures (FOSC) inspecting and testing items

 

Inspecting  item	Technical Requirements	Inspecting type
		Routine test (Before leaving factory)	Type test
Package	Each small package contains one fiber optic splice closure, together with its accessories, tools, installation manual and packing list.	full	At least 3 sets sampled each time
Appearance	Intact in shape, no burrs, bubbles, chaps, pores, warps, impurities and other defects, all background colors should be even and continual.
Sign	There is a clear sign on the housing, such as name and model of the product, etc.
Fiber storage device	The fibers reserved are to be winded in fiber optic splice tray (FOST), the length of fibers housed in FOST is >1.6m, the curved radius is >30mm. During the installation and maintenance, there should be no attenuation on fibers.	At least 3 sets sampled each time
Electrical jointing device	Inside FOSC: metallic components of fiber cables has the functions of electrical putting through, earthing connection and disconnecting. It is possible to install earthing deriving device outside the housing
Sealing performance	After sealing according to the stipulated operation procedures, the injected air pressure is 100KPa±5Kpa, when immersed in clean water of normal temperature for 15 minutes, there should be no air bubbles, then observed for 24 hours, there should be no change of air pressure.
Re-sealing performance	After reopening and resealing according to the stipulated operation procedures, the injected air pressure is 100KPa±5Kpa, when immersed in clean water of normal temperature for 15 minutes, there should be no air bubbles, then observed for 24 hours, there should be no change of air pressure.
Pull	Bearing pull is >= 800N at axle orientation, there should be no breakage on the housing.
Punching	Bearing pressure of 2000N/10cm for 1 minutes, there should be no breakage on the housing
Impact	Bearing impact energy of 16N•m, 3 times of impacts there should be not breakage on the housing
Bending	The spot between the FOSC and seal fitting can bear bending tension of 150N at bending angle of ±450 for 10 circles, there should be no breakage on the housing
Torsion	Bearing torsion 50N•m, 10 circle at torsion angle±900, There should be no breakage on the housing.
Temperature circle	Injected air pressure of 60KPa±5 KPa, the temperature circle ranging from -40ºC~+65ºC, 10 times of the circular tests (one circular consists of high temperature for 2 hours + indoor temperature for 2 hours + low temperature for 2 hours + indoor temperature for 2 hours ) when the pressure declines, the amplitude is <=5Kpa, immerse the swatch in clean water of normal temperature for 15 minutes, there should be no air bubbles.
Voltage resistance strength	After sealing the FOSC according to the stipulated operation procedures, immerse it in clean water of normal temperature in 1.5m depth for 24 hours, there should be no breakdown or arc over between the metallic components of the FOSC, between metallic components and the ground at DC 15KV for 1 minutes.
Isolating resistance	After sealing the FOSC according to stipulated operation procedure, immerse it in clean water in 1.5m depth for 24h, the isolating resistance between the metallic components of the FOSC, between the metallic components and the ground should be >= 2×104MΩ.

Related products



Our fiber patch cord production line:




Shipping:



Service:
1.Professional manufacturer, 100% tested.
2.Customers solutions in days, not weeks.
3.Warmly services with careful attentions.
4.Can provide your specific inquiry within 24 hours.
5.Save much costs, bring more benefit for customer to expand business. 
6.We have been 9 years experience in this field. We are the prefessional supplier that you can trust.

FAQ
Q1:How can you guarantee the delivery time?  
 
A:1. To avoid the delay, we have built a complete and professional procedure system from production to the deliver and have rich experience.
2. We can regulate the penalty clause in the contract for the late delay.
 
Q2:What's your best price?
A:Based on the quality of our products and the quantity of your estimated. We would quote the great best matching price all the time.
 
Q3:What's your MOQ? 
A:Low MOQ, 1pc for sample checking is available
 
Q4:Can I print our own logo on the product?
A:Yes, Please send your logo to us.
 
Q5:Can you provide OEM/ODM service?
A:Yes, we can. Please tell us the details of your requirements

Q6: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q7:Why choose us to cooperate?
1.  We have first-class production line and strict quality management system.
2.  We have professional procedure system and big production capacity to guarantee fast deliver and on time shipment.
3.  We can provide the most competitive price to meet your budget.
4.  We also design and innovate the new products based on our rich experience .
5.   We have professional team to provide comprehensive one-stop service for you.


Hope this would be a good start for our cooperation!